Track view

The Track view is always visible. It is the main window that you use to create, display, and work with a project. When you open a project file, the Track view is displayed for the project. Closing the Track view closes the project.

The Track view is divided into several sections: toolbars (at the top), the Navigator pane, the Video Thumbnails pane, the Track pane, the Clips pane, and the Bus pane. You can change the size of the panes by dragging the vertical or horizontal splitter bars that separate them.

Figure 648. The Track view.

A. Track view menu B. Time ruler C. Track strips D. Track pane E. Splitter bar F. Clips pane G. Clips

You can automate most of the controls in the Track view by recording fader movements, drawing envelopes, and creating snapshots.

In addition, all of the current track’s controls, plus a few that are only available in the Console view, are contained in the Track Inspector, which is an expanded version of the current track’s controls located on the far left side of the Track view. You can hide or show the Track Inspector by pressing I on your keyboard.

Track view menu

Figure 649. Track view menus.

View menu

The View menu contains the following commands:

Navigator Show/Hide. Show or hide the Navigator pane.

Tempo Track Show/Hide. Show or hide the Tempo pane.

Arranger Track Show/Hide. Show or hide the Arranger pane.

Video Thumbnail Track Show/Hide. Show or hide the Video Thumbnails track. The Video Thumbnails track can be displayed even if there is no video in your project.

Auto Track Zoom. This command enables/disables Auto Zoom, which allows you to automatically enlarge the track that has focus. All other tracks are minimized. When a new track is focused, it swaps heights with the previously focused track.

Display.  Use the submenu to select the desired display option:

Display Ghosted Data.  Show or hide all data types, regardless of which data type is selected in a track’s Edit Filter control. All but the selected data type will be shaded, or “ghosted”. This allows you to see all data types in context while editing a specific data type.

Display Track Separators. Show or hide a horizontal line between each track in the Clips pane.

Display Clip Names. Show or hide clip names.

Display Clip Contents. Show or hide a graphical depiction of the audio or MIDI data that the track contains, including automation data.

Show Audio Scale. Show or hide the Audio Scale Ruler in the splitter bar between the Clips pane and the Track pane.

Maximize Waveform Height. Show or hide clip headers. When this option is enabled, waveforms and MIDI data span the full height of clips.

Show Waveform Outlines. Show or hide waveform outlines in the Clips pane.

Show MIDI Controller Events. Show or hide MIDI controller events in MIDI clips.

Show Values on Envelopes. Show or hide values adjacent to automation envelope nodes.

Vertical Grid Lines. Show or hide vertical grid lines in the Clips pane that are one measure apart. Use the submenu to specify how the vertical lines should display.

None. Vertical grid lines are not displayed.

Behind Clips. Vertical grid lines are displayed, but clips will draw on top of them, so clip contents will not be obstructed.

In Front of Clips. Vertical grid lines are displayed and drawn on top of clips, always visible.

Only Show Active Arranger Track. Show or hide values adjacent to automation envelope nodes.

Fit Tracks and Buses to Window. Adjust the vertical track heights to fit all tracks in your project in the Track view.

Fit Project to Window. Fit the entire project, or as many tracks as possible, into the Track view.

Fit MIDI Content. Fit all displayed MIDI content into the visible area of the Inline Piano Roll view.

MIDI Microscope.  Activate Piano Roll Microscope mode. When Microscope mode is enabled, a transparent rounded square centered on the mouse cursor shows a zoomed in region of the Piano Roll data underneath it.

View Undo. Returns the Track view to the previous zoom level (undo zoom).

View Redo. Negate the last View Undo command (redo zoom).

Options menu

The Options menu contains the following commands:

Auto crossfade.  Enable or disable automatic crossfades.

Crossfade Type.  Specify default fade in, fade out and crossfade curve types.

Freehand Smoothing.  Specify how shape smoothing works when using the Freehand tool on envelope shapes:

Smooth. Uses the existing fit-to-curve functionality.

As Drawn (Linear). Joins the nodes up with linear shapes.

As Drawn (Jumps). Leaves the nodes as is, making them jump shapes.

Ripple Edit Selection. Enable ripple editing for clips that are downstream from the selected clip(s). Locked clips are ignored.

Ripple Edit All. Enable ripple editing for downstream clips on all tracks, plus meter/key changes, tempo changes, and markers. Locked markers are ignored.

Click Behavior.  Use the submenu to specify the behavior when clicking in the Clips pane:

Left Click Sets Now. Set the Now Time by left-clicking a location in the Clips pane.

Left Click Rewinds to Clip Start in Lanes. When isolating clips in Take lanes during playback, the Now time jumps to the clicked location by default. Enable this option to automatically jump to the clip start instead.

Left Click Locks Scroll. Prevent the Clips pane from scrolling horizontally during playback while you edit data. This allows you to focus on the edit location without worrying that the screen will eventually scroll away from the edit location. When you are done with the edit and want the Clips pane to scroll again during playback, click in the background of the Clips pane to clear auto scroll lock.

Right Click Sets Now. Set the Now Time by right-clicking a location in the Clips pane.

Double-Click. Use the submenu to specify what happens when you double-click a clip:

MIDI Clips > -Nothing-. Prevent any view from opening when you double-click a MIDI clip.

MIDI Clips > Clip Properties. Open the Clip Properties Inspector when you double-click a MIDI clip.

MIDI Clips > Event List View. Open the Event List view when you double-click a MIDI clip.

MIDI Clips > Staff View. Open the Staff view when you double-click a MIDI clip.

MIDI Clips > Piano Roll View. Open the Piano Roll view when you double-click a MIDI clip.

MIDI Clips > Inline Piano Roll View. Open the Inline Piano Roll view when you double-click a MIDI clip.

Audio Clips > -Nothing-. Prevent any view from opening when you double-click an audio clip.

Audio Clips > Clip Properties. Open the Clip Properties Inspector when you double-click an audio clip.

Audio Clips > Loop Construction View. Open the Loop Construction view when you double-click an audio clip.

Set Time During Playback. This option controls whether the Left Click Sets Now and Right Click Sets Now options have any effect when clicking in the Clips pane during playback.

Meter options.  Use the submenu to specify options for track playback meters, track record meters and bus meters.

Drag and Drop Options.  Open the Drag and Drop Options dialog box, which lets you control how clips behave when you drag them.

Mouse Wheel Zoom Options. Open the Mouse Wheel Zoom Options dialog box, which lets you specify the mouse zoom behavior.

Center on Now Time with Keyboard Zoom. Center the Now Time when zooming with keyboard shortcuts (CTRL+LEFT ARROW and CTRL+RIGHT ARROW).

Select Track Envelopes with Clips. Selecting a clip will also select any overlapping track envelopes.

Select Track Articulations with Clips. Selecting a clip will also select any overlapping track articulations.

Select Events with Sections. By default, clicking an Arranger section also selects underlying track events. Clicking again de-selects track events, while retaining selection of the section. To disable automatic selection of track events when selecting sections, disable Select Events with Sections.

Select Sections with Time Ruler (Active Arranger Track). Making a time selection in the time ruler will also select any overlapping Arranger sections in the active Arranger track.

Select Sections with Time Ruler (All Arranger Tracks). Making a time selection in the time ruler will also select any overlapping Arranger sections in all Arranger tracks.

Expand Track Folder after Moving to Folder. After moving a track into a collapsed track folder, the folder will automatically expand.

Expand Track Folder on Track Focus.  Changing the track focus will automatically open the focused track’s parent folder if it’s currently closed.

On Stop, Rewind to Now Marker. The Now Time jumps back to the Now Time Marker whenever playback stops.

Set Now Time with Full Restart. When you change the Now Time during playback, the Transport comes to a full stop, and then restarts playback. This stops the sound for a brief moment, but makes synchronization (especially with video) more robust.

Stop at Project End. Playback will automatically stop after the last event in the project is reached. When this option is disabled, playback will continue beyond the end of the project and playback can also be started in an empty project.

Tracks menu

The Tracks menu contains the following commands:

Make Instrument Track. If an existing audio track and MIDI track are assigned to the same software instrument, this command converts the two tracks into a single instrument track (only available for MIDI tracks).

Split Instrument Track. Split an instrument track into separate audio and MIDI tracks. The audio and MIDI tracks will remain assigned to the same software instrument (only available for Instrument tracks).

Bounce to Track(s). Combine one or more audio tracks into a submix.

Duplicate Track(s). Copy the selected track(s). You can choose to include events, properties, sends, and/or effects in the copied track(s), and specify a destination.

Delete Track(s). Delete the selected track(s), including all its track properties and all its clips and events. Cakewalk does not put deleted information on the Clipboard for later copying.

Wipe Track(s). Delete track contents but leave track properties intact. Cakewalk does not put wiped information on the Clipboard for later pasting.

Copy Track Name(s) to Clip Name(s). Copy track names to clips in corresponding tracks.

Show All Tracks and Buses. Show all tracks in the project.

Hide Track(s). Hide all selected tracks. To display them again, select Tracks > Track Manager or press H on your keyboard to open the Track Manager dialog box.

Track Manager. Open the Track Manager dialog box.

Sort Tracks. Open the Sort Tracks dialog box, which lets you sort tracks by specific criteria.

Selected Track Input Series. Open the Assign Series of Inputs dialog box, which lets you assign a series of track inputs to the selected tracks.

Selected Track Inputs. Open the Track Inputs dialog box, which lets you assign a track input to the selected tracks.

Selected Track Outputs. Open the Track Outputs dialog box, which lets you assign a track output to the selected tracks.

Clips menu

The Clips menu contains the following commands:

Apply Trimming. Permanently delete any data from a selected clip that is hidden by a slip editing edit.

Bounce to Clip(s). Combine selected audio clips into a single clip.

Convert to Stereo. Convert any selected mono audio clip(s) to stereo.

Convert to Mono. Convert any selected stereo audio clip(s) to mono.

Fade clips. Open the Fade Selected Clips dialog box, which allows you to create or edit fades on selected clips.

Duplicate Selected Clip(s). Duplicate the selected clip(s).

Create Clip Selection Group. Place all selected clips in a new selection group.

Remove from Clip Selection Group. Remove all selected clips from any selection groups they may belong to.

Revert to Original Time Stamp. Move all selected clips back to their original SMPTE time position.

Set Snap Offset to Now Time. Set the snap offset at the Now Time. A snap offset is a value, in samples, at which the Snap Grid uses to align the clip. Clips without a snap offset always align at the very beginning of a clip.

Select All Siblings. Select all clips that are linked to the selected clip.

Unlink. Open the Unlink Clips dialog.

Unlink Step Sequencer Clips. Unlink the selected step sequencer clips, allowing each clip to be edited separately from each other.

Convert MIDI Clip(s) to Step Sequencer. Convert any selected MIDI clip to a step sequencer clip.

Convert MIDI Controllers to Envelopes. Open the Convert MIDI To Shapes dialog, which lets you convert MIDI controllers into automation envelopes.

MIDI menu

The MIDI menu contains the following commands:

Show Notes.  Show or hide Note events in the Inline Piano Roll view.

Show Velocity.  Show or hide velocity tails in the Inline Piano Roll view.

Show Velocity on Selected Notes. Show velocities for selected Note events only. This makes it easier to see and edit velocities when many Note events are present. It also makes it easier to change the velocity for individual Note events that are stacked (such as chords).

Select Controllers Along With Notes.  When enabled, selecting a Note event or a range of Note events will also automatically select any Controller events that exist within the time range of the Note event(s).

Show Clip Outlines. Show or hide clip outlines in the Inline Piano Roll view.

Hide Muted Clips. Show or hide events that live in muted clips when working in the Inline Piano Roll view.

Non-Destructive MIDI Editing. Select this option to make all MIDI editing non-destructive. When toggled on, this option forces deleted data to be retained even though it is not visible.

Split MIDI Notes. Select this option to split any underlying MIDI notes when you split clips, and insert MIDI chase events (such as continuous controllers, Pitch Wheel, and Patch Change) at the split position.

Arranger Section Event Overlap Threshold. If MIDI note events overlap section boundaries, specify the threshold that determines which overlapping note events are included when moving sections or committing arrangements.

Off. Ignore overlapping notes.

Note value (Whole – 1/256 Triplet). Only include notes that overhang by a duration equal to or less than the selected value.

Any Overlap. Include notes that overhang by any duration.

Region FX menu

The Region FX menu contains the following commands:

Melodyne:

Create Region FX. Create a Melodyne Region FX clip.

Remove Region FX. Remove the Melodyne processor from the selected Melodyne Region FX clip.

Open Editor. Open the Melodyne interface.

Render Region FX. Commit the Melodyne Region FX and render the results to a new audio clip.

Bypass Region FX. Bypass or unbypass all selected Melodyne Region FX clips.

Follow Host Tempo. Allow the selected Melodyne Region FX clip to automatically follow future tempo changes to Cakewalk’s tempo map.

Note: It is not possible to slip-stretch Region FX clips that have the Follow Host Tempo option enabled.

Copy MIDI Events. Convert the selected Melodyne Region FX clip to MIDI data, and copy to the Clipboard. The data can be pasted to any MIDI or Instrument track.

V-Vocal:

Create Region FX. Create a V‑Vocal Region FX clip.

Remove Region FX. Remove the V‑Vocal processor from the selected V‑Vocal Region FX clip.

Open Editor. Open the V‑Vocal Editor interface.

Render Region FX. Commit the V-Vocal Region FX and render the results to a new audio clip.

Bypass Region FX. Bypass or unbypass all selected V‑Vocal Region FX clips.

Bypass All Region FX. Bypass or unbypass all Region FX clips in the project.

Drum Replacer:

Create Region FX. Create a Drum Replacer Region FX clip.

Remove Region FX. Remove the Drum Replacer processor from the selected Drum Replacer Region FX clip.

Open Editor. Open the Drum Replacer interface.

Render Region FX. Commit the Drum Replacer Region FX and render the results to a new audio clip.

Bypass Region FX. Bypass or unbypass all selected Drum Replacer Region FX clips.

Follow Host Tempo. Allow the selected Drum Replacer Region FX clip to automatically follow future tempo changes to Cakewalk’s tempo map.

Note: It is not possible to slip-stretch Region FX clips that have the Follow Host Tempo option enabled.

Copy MIDI Events. Convert the selected Drum Replacer Region FX clip to MIDI data, and copy to the Clipboard. The data can be pasted to any MIDI or Instrument track.

Track pane

The Track pane lets you see and change the settings for each track. Selected tracks always appear in a different color. The controls for an individual track are grouped together to form that track’s track strip.

To change the current track, move the highlight using the mouse or the keyboard as follows:

Key	What it does
UP ARROW and DOWN ARROW	Moves the selection to the adjacent track. If a control is selected, the selection moves to the same control in the adjacent track, or the next track of the same type if the control only applies to a specific track type (for example, the Patch control only applies to MIDI tracks)
LEFT ARROW and RIGHT ARROW	Moves to the previous or next control in the Track pane. The RIGHT ARROW key moves the selected control right until reaching the end of a line, and at the end of the line the selection moves to the left-most control of the line below. The LEFT ARROW key moves the selected control to the left until it reaches the beginning of a line, and then moves to the end of the line above.
PAGE DOWN	Displays the next page of tracks
PAGE UP	Displays the previous page of tracks
HOME	Moves the highlight to the first track in the project
END	Moves the highlight to the last track in the project

The Track pane contains meters for recording, playback, and bus levels. You can hide or show any or all of these meters, and choose many different options for the units and format of the data the meters display. See Metering.

Clips pane

The Clips pane shows the clips in your project on a timeline that helps you visualize how your project is organized. Clips contain markings that indicate their contents. The Clips pane lets you select, move, and copy clips from place to place to change the arrangement of music and sound in your project.

The Track view makes it easy to select tracks, clips, and ranges of time in a project. These are the most common selection methods:

To	Do this
Select tracks	Click on the track number (the right side of the track number; the upper left corner of the track number is for grouping tracks), or drag over several track numbers
Select clips	Click on the clip, or drag a rectangle around several clips
Select time ranges	Drag in the Time Ruler, or click between two markers

As with most other Windows programs, you can also use the SHIFT-click and CTRL-click combinations when selecting tracks and clips. Holding the SHIFT key while you click adds tracks or clips to the current selection. Holding the CTRL key while you click lets you toggle the selection status of tracks or clips.

 

Note: If the Clips pane does not scroll during playback, and the Now Time Marker disappears off-screen, make sure the SCROLL LOCK key on your computer keyboard is not enabled.

 

See:

Automation

Bus pane

The Bus pane contains all of your project’s buses. You display the Bus pane by clicking the Show/Hide Bus Pane button , which is located at the bottom of the Track view.

You use the buses in the Bus pane to patch in effects, control output volume and pan, and group tracks into subgroups.

 

See:

Hardware outs

To patch a track through a bus

Bus selection

Track/Bus Inspector

The Track/Bus Inspector makes it easy to adjust the current track’s (or bus’s) controls, because it’s a greatly expanded version of the current track’s controls that is located on the left side of the Track pane.

For more information about the Inspector, see Inspectors.

The Navigator pane

The Navigator pane, located just above the Track pane, displays the whole length of your project so you can always see an overview of your song, and where the Now time is. The Navigator pane displays all of your project’s tracks. To show or hide the Navigator pane, click the Track view View menu and choose Navigator Show/Hide or press ALT+N. You can drag the splitter bar between the Navigator pane and the Track pane to change its height.

The Navigator pane has a green rectangle in it that is an outline of what the Clips pane is currently displaying. If you drag the center of the rectangle around in the pane, it scrolls the Clips pane to the same view. You can drag any of the nodes on the rectangle to zoom the Clips pane in or out. If you click in the Navigator pane, the left border of the rectangle jumps to the spot you clicked, and scrolls the Clips pane to that spot also. If you hold down the CTRL key while you click, the Now time jumps to that spot.

Figure 650. The Navigator pane.

A. Now Time B. Drag node to zoom C. Clips

You can do the following with the Navigator pane:

Scroll the display of the Clips pane (drag the green rectangle, or click in the Navigator pane)

Zoom in and out in the Clips pane (drag a node on the green rectangle)

Change the Now time using the Navigator pane (CTRL-click in the Navigator pane)

Cakewalk and screen readers for vision impaired users

Cakewalk has a special Accessibility Mode which can be helpful for vision impaired users when working with screen readers (Window-Eyes, JAWS, etc.). The Accessibility Mode is enabled by adding a key to the Windows Registry (WARNING: only do this if you are comfortable with editing the Windows registry; you may want to back up the registry first), and allows screen readers to receive various information from Cakewalk that may otherwise not be displayed on the screen (names, values, etc.).

The key is:

HKEY_CURRENT_USER\Software\Cakewalk Music Software\Cakewalk\Core

The Value is:

AccessibilityMode

It is a DWORD. Value can be 0, 1, 2, 3 or 4:

0 - no accessibility (default)

1 - enable Microsoft UI Automation; put the access string in the Track view's caption

2 - enable Microsoft UI Automation; put the access string in the CWACCESS window

3 - enable Microsoft UI Automation; put the access string in the CWACCESS window and make this window visible

4 - enable Microsoft UI Automation without enabling the CWACCESS window

 

See also:

Customizing track/bus colors